3. Program and Operation
3.10 Auto Scan Menu
▲
/
▼
: move joystick up and down for selecting an item.
◀
/
▶
: move joystick left and right for moving an item.
▶
/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages.
▶
/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back).
An {Auto scan} is a PTZ function that can be moved from one position to another position.
The dome has maximum 8 {Auto Scan} and {Scan Speed} can be changed from 1 to 35 degree/
sec. Use the following steps to program a {Auto Scan}.
- Enter into {Main Manu}
- Select {Auto Scan} and move left or right to select {Auto Scan} Number.
- Move the joystick right [
▶
] to edit {Auto Scan}: {Edit Start Point}/ {Edit Stop Point}
- Using the joystick, move to a desired target (Pan/Tilt/Zoom) at screen of
{Edit Start Point}/ {Edit Stop Point}
- Press [Near] button or use joystick to save settings.
- Press [Far] button or use joystick to return to previous menu {Scan Setup} (Back).
- To edit and clear the {Scan Title}, refer to Editing a Title section (3.2.1).
- It is possible to clear saved Scan No.xxx in the {Scan setup} Menu individually.
- Set {Dwell Time} using the joystick [
▶
].
- Press [Open] button or use joystick [
▶
] to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
29
SCAN SETUP
NO. 001
: NOT USED
EDIT
:
SPEED
:
DTIME
:
DIRECTION
:
MODE
:
CLEAR
SAVE : OPEN
BACK : CLOSE
START POSITION SETUP
PRESS MOVE KEY
SAVE : (NEAR)
BACK : (FAR)
STOP POSITION SETUP
PRESS MOVE KEY
SAVE : (NEAR)
BACK : (FAR)
