3. Program and Operation
3.3.4 Entering a Password
To prevent unauthorized changes to the dome settings, the dome have the feature of password
protection. An unauthorized operator cannot access to any of the dome settings menus. The
password must be entered before programming. The valid password with four characters must
be entered to continue programming.
- Enter into {Main Menu} (refer to Accessing Main Menu)
- Select {System} and move to {Password} in the sub menu of {System} using joystick [
▶
].
- Select numbers using joystick left/right and press [Tele] key.
- To lock the password, set Enable: Enable
* Note
:
0000 is the default password.
3.4 Display Setup Menu
▲/▼
: move joystick up and down for selecting an item.
◀/▶
: move joystick left and right for moving an item.
▶/
[Open]/ [Near]: move joystick right to select or save settings or go to edit pages.
▶/
[Close]/ [Far]: move joystick to cancel or to exit current menu (Back).
Enter into {Main Menu}: refer to {3.1.1 Accessing Main menu}.
3.4.1 Language
- Select {Display Setup} and move to {Language} using joystick [
▶
].
- If you want to use another language, select one
from English/Chinese/Russian/Spanish/German/Italian/French/Netherlandish.
18
PASSWDRD
CURRENT
: ...
ENABLE
: DISABLE
NEW
: ...
CONFIRM
: ...
0123456789
-SET/CLEAR : (TELE/WIDE)
-EXIT : (FAR)
DISPLAY SETUP
OSD SETUP
PRIVACY ZONE
IMAGE SETUP
MOTION/FACE
LANGUAGE: ENGLISH
EXIT
