KSI Filtertechnik GmbH
| www.ksi.eu · [email protected]
27
10.
Filter APF
10.1 Areas of application
KSI ECOCLEAN
®
filters are designed to remove particulate matter, aerosols, oil vapours and
odours from non-aggressive compressed air and technical gases. Depending on the speci-
fic application, different validated filter elements can be installed.
WS
Metal element with centrifugal effect for initial separation of water vapour and
aerosols.
VF25
Coarse filter element for separating impurities up to 25 µm particle size
FF5
Pre-filter element for separating coarser dirt concentrations in a solid or
liquid state
MFO
Fine filter element for separating aerosols up to 0,5 mg/m³ and particulate matter
up to 1 µm particle size
MF1
Fine filter element for separating aerosols up to 0,1 mg/m³ and particulate matter
up to 0,1 µm particle size
SMA
Ultra-fine filter element for separating aerosols up to 0,01 mg/m³ and particulate
matter up to 0,01 µm particle size
CA
Activated carbon filter element for separating oil vapours up to 0,003 mg/m³
DMF
Dust fine filter element for separating particulate matter up to 1 µm particle size
DF1
Dust fine filter element for separating particulate matter up to 0,1 µm particle size
DSF
Dust ultra-fine filter element for separating particulate matter up to 0,01 µm
particle size
VP MFO Vacuum pump protection filter for a filtration of particles, humidity vapour
and aerosols
V MFO Vacuum pump exhaust filter for a filtration of particles and dust up to 1 micron,
oil carry over at 20 °C 0,5 mg/m³
V SMA Vacuum pump exhaust filter for for a filtration of particles and dust up to 0,01
micron, oil carry over at 20 °C 0,01 mg/m³
V CA
Activated carbon element for vacuum pump exhaust filters for separation of oil
vapour and odours up to a value of 0,003 mg/m³
