Ksenia KSI1000016.300, Краткое руководство пользователя

Страница: 13 / 31

ENGLISH
are meant to be utilized for windows and or curtain magnetic contacts.
3.
Zone from 7 to 10 . They have to be connected from the terminal 'M1' to the 'M4' of the CP. They
are all programmed with no delay, double-balance and belonging to the Partition “Volumetric
Detectors”. They are meant to be utilized for Volumetric Sensors installed inside the building.
Outputs:
Depending on the Control Panel Model, up to 128 Outputs can be managed contemporarily, linked to the
lares Control Panel, the ergo Keypad (up to 2 Zones per Keypad) and the auxi expansion modules (up to 5
Zones) all these being physical outputs OC (Open Collector) type. Additionally there are logic Ouputs,
which need to be used to activate events on the Bus Sirens (
imago and radius ). In this template 5 Outputs
have been already programmed as follows:
1.
Relay. It is the only relay Output present on the Panel, whose terminals are available directly on
the lares Control Panel. It has a free contact (C-NC-NO) and one linked directly to +12V (+R, +A). It
activates itself when an alarm condition or a masking event is occurring. It can be used to link
Sirens of “Universal type” or to activate external communication devices.
2.
Arming Status . It is a logic Output which activates the flashing red LEDs on the Outdoor imago
Siren when the system is armed Stay or Away .
3.
Alarm imago : it is a logic Output which activates the Outdoor imago Siren when a condition of
alarm or tamper are occurring.
4.
Alarm radius : it is a logic Output which activates the Indoor radius Siren when a condition of alarm
or tamper are occurring and the System is Armed (AWAY).
5.
Manual Exit : it is a physical Output, associated to the M1 Terminal of the Keypad ergo. It
activates / disactivates when the number 9 will be touched for more then 3 seconds on the
Keypad. It is meant to activate an external automation (automatic gate, door opening, garden
lights, etc.)
BUS Peripherals:
The Control Panel Architecture enables to configure many different Peripherals, whose number depends
from the CP model. In this template, 4 Peripherals have been already programmed as follows:
1.
Nr. 1 ergo Keypad (Ksenia code KSI2100000.300)
2.
Nr. 1 volo Outdoor Proximity Reader (Ksenia code KSI2200000.300Black or KSI2200000.310 in
White color)
3.
Nr. 1 r adius BUS Indoor Siren with Emergency Light Function (Ksenia code KSI6101000.300)
4.
Nr. 1 imago BUS Outdoor Siren (Ksenia code KSI6301000.xxx with various color availability)
13