EN
8
ESC
The ESC key allows to exit the current menu, and go back to the previous level. This means that, wether
in a branched menu, repeated clics on the key will be needed to get back, for exanple to main menu.
A 2-second pressure on the ‘Esc’ key when the keyboard is not used allows the activation of the
cleaning function. As the name suggests, this function disable the keypad functionality for front-
cleaning purposes.
During the keypad block due to the activation of the cleaning function, the following information will
be displayed on the
ergo
screen:
•
First line: “Keypad block”
•
Second line: forewarding “.” which marks the keypad block lasting. It means that, as the “.” gets to
the last line character, the cleaning function ends and
ergo
recovers its regular functionally.
ENTER
DISPLAY
RFID/NFC AREA
The Enter key allows to enter the intended menu when browsing, to start editing during configuration
phase or to confirm the input of a data during an editing session.
In this regard, the following conduct:
• When broswsing the main menu, a pressure on the Enter key allows to enter the submenu and to
keep exploring in case the menu has several branches
• When visualizing the configuration data, a push on the Enter key permits the editing of the data itself
and this involves:
- the configured object flashes if it is slectable with a predefined set through the Scroll;
- the first character of a string flashes in case the string its being edited;
- the first number flashes when a numeric data or a phone number is being edited.
• During the editing phase, a further pressure on the ENTER key confirms the immission or modification
of the data (which will be sent to
gemino
or
lares
that will store it) and the
ergo
display permits to show:
the following data, the subsequent menu or the data itself.
If “Enter” key is pushed when ergoTM is in standby mode, the display will show the installator’s data
(Name, Number or email address) if they were set during the keypad configuration. In case the
installator’s data were not available, the screen will display the two following default line:
<Installator>
<Information>
The Display shows all the information and the datas
ergo
can manage. It consist of 2 lines with 16
characters each (it is not graphic), but it can display longer strings (up to 32 characters) thanks to the
manual and automatic shift functions available on his FW. As a matter of fact, if there’s the need to
display a 32 characters string on the first dsplay line it will be shifted to and fro 16 characters at any 3
seconds. If the 32 character string were on the second line it would be shifted through the “Right arrow”
and “Left arrow” keys. It will shift one character at any one time when in a data editing phase or 16
characters at any one time when browsing the menu.
The keypad is provided with an internal antenna that allows to detect Tags, Mobile phones or any other
devices provided with chips that work with RFID/NFC 13,56MHz standard simply by approaching it to the
area shown in figure at page 15.
