KSB Cervomatic EDP.2, Инструкция по установке и эксплуатации

Страница: 11 / 28

4 Description
11 of 28
Cervomatic EDP.2
4.7 Displays and indicator lamps
MENU
LI
N
E
FA
IL
U
R
E
A
U
T
O
P
U
M
P
Cervomatic EDP.2
1
2
3
4 5 6 7 8 9
10
Fig. 2:
Indicator lamps
1 Display of various parameters during configuration.
In operation, the current pressure, configured start-up pressure and alerts are
displayed.
2 AUTO On/Off button: For selecting between manual and automatic mode.
3 LINE LED (green): Illuminates when the automatic control unit is connected to
the power supply.
4 FAILURE LED (red): Illuminates or flashes, depending on the type of fault.
5 AUTO LED (green): Illuminates in automatic mode; does not illuminate in
manual mode.
6 PUMP LED (yellow): Illuminates when the pump is operating.
7 PUMP start/stop button: Can only be pressed when automatic mode is
deactivated (AUTO LED does not illuminate).
8 MENU button: Opens and closes the configuration menu.
9 ENTER button: Saves configured values. A new field appears in the
configuration menu every time the button is pressed. Press MENU to exit the
configuration display.
10 ▲ and ▼ button: Adapts the configuration parameters up and down.
4.8 Fluids handled
▪ Drinking water
▪ Service water
▪ Stormwater
▪
Fire-fighting water
▪ Cooling water