KSB AMTRONIC R1300, Инструкция пользователя

Страница: 5 / 36

5
AMTRONIC R1300
Content
Page
I - Introduction 6
I- 1 General 6
I- 2 Technical characteristics 6
II - Assembly on pneumatic actuator 7
II - 1 ACTAIR 3 to 200, ACTAIR NG 2 to 160, DYNACTAIR 1.5 to 100 and DYNACTAIR NG 1 to 80 7
II - 2 ACTAIR NG 240 to 700 and DYNACTAIR NG 120 to 350 8
II - 3 ACTAIR 400 to 1600 and DYNACTAIR 200 to 800 and other ¼ turn actuators 9
II - 4 Linear actuators 10
III - Assembling the AMTRONIC/Actuator assembly on the valve 12
IV - Safety position on loss of current 12
V - Pneumatic supply 14
V - 1 Pneumatic connection 14
V - 2 Mechanical adjustment of the operating time 15
VI - Electric connections 16
VI - 1 General 16
VI - 2 Solenoid valve connection 17
VI - 3 Position detection connection 18
VI- 3- 1 Contacts and standard DPI 18
VI- 3- 2 Other contacts and detectors 20
VI - 4 Angle sensor connection (option) 21
VI - 5 Feed- back position (option) 22
VI- 5- 1 Electrical characteristics 22
VI - 6 Heating resistance connection (option) 23
VI- 6- 1 Electrical characteristics 23
VII - Pneumatic distribution 23
VII - 1 Monostable distributor 23
VII - 2 Bistable distributor 23
VII - 3 4/3 distributor 24
VII - 4 Use of emergency manual controls 25
VIII - Position detection 27
Adjusting limit switches or contacts 27
IX - Position recopy (option) 28
Adjustment of 0% and 100% 28
X - Operating faults - Causes and solutions 29
XI - Codifications 30
XII - Spare parts kit 33