Krups HP50A8, Руководство пользователя

Страница: 95 / 96

95
ENGLISH
Is your appliance still not working?
Contact an approved service centre (see list in service booklet).
„
Elimination of packaging and appliance materials.
The packaging exclusively contains materials that are not dangerous to the envi-
ronment, which can be disposed of in accordance with the recycling regulations
in force.
To dispose of your appliance, ask the appropriate department of your local authority.
„ End-of-life electronic or electrical appliances:
Environmental protection first!
Your appliance contains numerous materials that can be recovered or recycled.
Take it to a collection point for processing.
RECYCLING
PROBLEMS CAUSES SOLUTIONS
“SECU” is displayed
+ red indicator light is
flashing.
Overheating of temperature
sensors.
Contact an approved service centre.
“Err1” is displayed.
+ red indicator light is
flashing.
The heating element is not
working.
Check that the power pins under the
bowl are not clogged. If this is the case,
clean them and try again.
If that still does not work, contact an
approved service centre.
“Err2” is displayed. Electronic fault. Contact an approved service centre.
“Err3” is displayed. Speed fault. Contact an approved service centre.
“Err4” is displayed.
Communication fault with
chopper electronic card.
Contact an approved service centre.
Display "Err8" Safety locking sensor fault Contact an Approved Service Centre.
“ntc1” is displayed. Temperature sensor 1 is no
longer working.
Contact an approved service centre.
“ntc2” is displayed. +
red indicator light is
flashing.
Temperature sensor 2 is no
longer working.
Contact an approved service centre.
Safety indicator
display (C5)
Improper locking of the bowl
or lid
Prior to operating the appliance, check
that the bowl is properly locked on the
motor unit and that the lid is properly
locked on the bowl. If the problem
persists, contact an authorised centre.
The lid is locked on the bowl in
the “cooking without a lid” mode
Unlock the lid prior to launching the
cooking program. If the problem persists,
contact an authorised centre.
The safety lock on the
lid remained active
(rod extended) and
prevents the lid from
locking.
The appliance was turned off
as a recipe was in progress
by toggling the I/O switch to
the “O” position or was simply
unplugged as a recipe was in
progress.
Simply toggle the I/O switch to the “I”
position to reset the food processor,
along with the safety lock on the lid; the
rod will automatically return to its original
position. You may now lock the lid.