10
• The display (q) will show the time and a “
“.
• Press the
h/min
button to cancel the programming. This will shut off the Auto On.
Changing the Programming
• Press the
prog
button (o) briefly : the current clock setting will blink.
• Now proceed as above.
Setting Auto Off (units with timer only)
On models with a glass carafe, the auto off can be set to shut the coffee machine off from 1 - 5
hours after the brew cycle is complete. The factory setting is 2 hours. On models with a thermal
carafe, the coffee machine shuts off after 20 minutes.
Note
: On models without a timer the coffee machine must be turned off manually. It
will not automatically shut off.
• Press the
prog
button (o), immediately followed by the
h/min
button (n).
• The display will show the time setting.
• Press the
h/min
button in steps to set the auto off time.
• Press the
prog
button to confirm the setting.
Setting Audible signal
This function gives an audible signal when the coffee is ready. The factory setting is “On“.
• The display (q) will show “
“ with the current time.
• To turn off the audible signal :
• Press
prog
button then the
1 - 3 cup
button (p).
• The display will show “YES“: indicating the audible signal is on.
• To turn the audible signal off:
• Press the
1-3 cup
button again.
• The display will show “NO“: the audible signal is off.
• Press
prog
button to confirm.
1 - 3 Cup Flavor Setting
This setting extracts the full flavor of the coffee when making small quantities.
• Press the
1-3 cup
button (p).
• The display will show “
“ with the current time.
Note
: this function cannot be changed once the brew cycle has started.
Empty Water Reservoir
This feature automatically shuts off the coffee machine when the water reservoir has not been
filled.
• The display will show: “
“.
• Wait for the coffee maker to cool down (about 10 minutes) before filling the reservoir (a)
with water.
NPA USA. PM6.5 copie
4/12/06, 10:26
10
