English
11
BEFORE USING FOR THE FIRST TIME
n
Remove all the packaging, stickers and various accessories both inside
and outside of the kettle.
n
Adjust the length of the cord by coiling it under the base. Pinch the cord
in the slot.
(fig. 1)
n
Rinse the inside of your kettle and filter separately. Boil 2 or 3 kettlefuls.
Discard the water from these first two/three uses as it may contain
dust.
USE
1) Place the base on a smooth, clean and cold surface.
Your kettle must only be used with its own base and its own anti-lime
scale filter
2) To open the lid:
n
Remove the lid by turning to the left and lifting (fig. 2)
n
To lock the lid, click it on and turn right.
3) Fill the kettle with the desired amount of water. (fig. 3).
You can fill it by the spout by pressing on the trigger, which ensures
better maintenance of the filter.
Never fill the kettle when it is on its base.
Do not fill it above the maximum level or below the minimum level. If the
kettle is overfilled, boiling water may be ejected.
Do not use without water.
Check that the lid is properly closed before use.
4) Place the kettle on its base (fig. 4) connected to the mains.
When the kettle is plugged in, a beep sounds and the screen lights up.
Familiarise yourself with the display and the various functions of the
kettle by referring to figures 6 and 7:
Electronic base (fig. 6):
A.
ON/OFF button
B.
Keep warm button
C.
+/- button for the choice of temperature and duration of the keep
warm cycle
D.
Digital display
IFU_KR_KETTLES_PRECISION_NC00017283_Mise en page 1 01/06/10 14:21 Page11