Kruger ASGARD120M, Инструкция по эксплуатации

Страница: 9 / 22

EN
TROUBLESHOOTING
FAULTS
CAUSES REMEDIES
• Check power specifications
• Check power connections
• No power supply
• Check fuse
• Mains switch in wrong position • Select correct position
• Check thermostat position
• Check thermostat electrical connection
• The heater fails to start and fan does not start
• Faulty operation of room thermostat (A
model)
• Check thermostat operation
• Check if gas bottle is empty
• Check gas supply line and remove any debris inside
•Insufficient gas supply
• Check pressure regulator and replace if necessary
• Check that the suction and the flow grills are
unobstructed
• Check that the room is well ventilated
• Check that hot air can escape freely
• Safety thermostat tripped due to
overheating of combustion chamber
• Check that gas flow and/or pressure are not excessive
• Check that the suction and the flow grills are
unobstructed
• The flame does not light up
• Check ionization electrode positioniing
• Faulty safety thermostat • Check room thermostat and replace it if necessary
• Repeat starting operation keeping thermal gas valve
button pressed for at least 13 seconds
• Check thermocouple positioning
• Thermocouple is insufficiently heated
and gas valve closes (M - M DV
models)
• Remove thermocouple and clean it
• Faulty thermocouple (M - M DV
models
• Check thermocouple and replace it if necessary
• Ionization electrode does not detect a
flame (A model)
• Remove flame sensor and clean or replace it
• Control unit tripped due to irregular
burner operation (A model)
• Contact Customer Service
• The heater fails to start flame and stops while:
M - M DV MODEL
>> fan goes on
A MODEL
>> lamp (8) lights up with steady red light
• Faulty electronic control unit (A
model)
• Check the unit and replace it if necessary
• Gas solenoid valve does not close
because of debris
• Close main gas stopcock on gas bottle, let the heater
burn remaining gas in gas tube, and contact Customer
Service
• Check room thermostat and replace it if necessary
• The heater does not stop when "STOP"
procedure is followed
• Faulty room thermostat (A model)
• Check electric connection of room thermostat
• Foreign bodies on fan blades • Remove foreign bodies
• Fan noise or vibrations
• Insufficienct air circulation • Eliminate all possible obstacles to proper air flow
If the heater is still not working properly, please contact your nearest dealer or authorized Service Centre.
7
kruger.es