Krüger & Matz KM1534, Руководство пользователя

Страница: 38 / 76

38
Owner’s manual
EN
No disc detected
• Insert a disc.
• Check if the disc is inserted with the
print side facing inward.
• Wait until the moisture condensation at
the lens has cleared.
• Replace or clean the disc.
• Use a finalized CD or correct format
disc.
Cannot display some file in USB device
• The number of folders or files in the
USB device has exceeded a certain
limit. This phenomenon is not a
malfunction.
• The formats of these files are not
supported.
Remote control does not work
• Before pressing any function button,
first select the correct source with the
remote control instead of the main unit.
• Reduce the distance between the
remote control and the unit.
• Insert the battery with its polarities (+/–
signs) aligned as indicated.
• Replace the batteries.
• Aim the remote control directly at the
sensor on the front of the unit.
Disc does not play
• Insert a readable disc and ensure that
the label side faces up.
• Check for any scratches or smudges
on the disc.
• Moisture has condensed inside the
system. Remove the disc and leave
the system turned on for about an hour.
• Disconnect and reconnect the AC
power plug, and then turn on the
system again.
• As a power-saving feature, the system
turns off automatically 15 minutes
after disc play reaches the end and no
control is operated.
The audio quality is poor after connection
with a Bluetooth-enabled device.
• The Bluetooth reception is poor.
Movethe device closer to this unit or
remove any obstacle between them.
Cannot connect with this unit.
• The device does not support the
profiles required for this unit.
• The Bluetooth function of the device is
not enabled. Refer to the user manual
of the device to find out how to enable
the function.
• This unit is not in pairing mode.
• This unit is already connected with
another Bluetooth-enabled device.
Disconnect that device and then try
again.