Krone Swadro 807 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 94

Krone Swadro 807 Скачать руководство пользователя страница 41

Operation

41

Pos : 20.11. 1 / BA/Bedienung / Sc hwader/Sc hwadtuc h/ Sc hwadf or mer/ Einst ellen des hi nt eren Schwadt uches Swadr o 807_809_810 @ 76\ mod_1309769433478_78. doc @ 664286

8.5

Adjusting the Rear Swath Cloth

(Swadro 807/ 809/ 810)

2

SW810023_2

1

1

3

Pos.I

Pos.II

Fig. 15

Pos : 20.11. 2 / BA/Bedienung / Sc hwader/Sc hwadtuc h/ Sc hwadf or mer/ Sc hwadt uc h allgemei n @ 2\ mod_1202830085935_78. doc @ 61884

Note

The swath cloth must be set while the rotor arms are lowered.
The tractor engine must be turned off and the ignition key must be removed.

The distance from the swath former to the rotor can be adjusted for narrow or wide swathing or
to continuously adapt to the amount of forage. The distance from the swath former to the rotor
must be adjusted for the amount of forage.

High amount of forage = long distance
Small amount of forage = short distance

Pos : 20.11. 3 / BA/Bedienung / Sc hwader/Sc hwadtuc h/ Sc hwadf or mer/ St ec kbolzen f ür die Ar beit sst elllung umst ec ken @ 78\ mod_1313667230110_78.doc @ 693473

•

For the working position, the socket pin (3) must be reconnected from pos. I to pos. II.
and secured.

Note

The socket pin (3) prevents in pos. I that the swath former comes in contact with the tines of the
rotor.

Pos : 20.11. 4 / BA/Bedienung / Sc hwader/Sc hwadtuc h/ Sc hwadf or mer/ Sc hwadt uc h eins tell en Swadr o 807_810 @ 78\ mod_1313670766215_78.doc @ 693500

•

To do this, loosen the cone grip and set screw (1), move the swath former (2) to the
correct position and then tighten the cone grip and set screw (1) again.

Pos : 20.11. 5 / BA/-----Seit enumbruc h------ @ 0\ mod_1196175311226_0. doc @ 4165

«
...
39
40
41
42
43
...
»

Содержание Swadro 807































































































Отзывы:

Нет отзывов