Krone Swadro 807 Скачать руководство пользователя страница 27

Страница: 27 / 94

Commissioning

Pos : 14.1 /Übersc hrift en/Übersc hrift en 1/ A-E/Ers tinbetriebnahme @ 0\ mod_1196314201498_78. doc @ 5855

Commissioning

Pos : 14.2 /BA/ Sicher heit /G ef ahr enhinweis e/F ehl erhaf ter Z us ammenbau @ 1\ mod_1202224212591_78. doc @ 58171

Danger! - Incorrect assembly

Effect: Danger to life, serious injuries or serious damage to the machine.

•

Only authorised service centres may assemble the machine.

•

The machine must be assembled with special care.

•

Always heed the applicable accident prevention regulations.

•

Use only safe and sufficiently dimensioned lifting equipment and load-securing
equipment.

•

The machine may be taken into operation only after all the safety devices have been
installed.

•

If unauthorised modifications are made to the machine, the manufacturer is released
from liability for any resulting damage.

Pos : 14.3 /BA/ Sicher heit /G ef ahr enhinweis e/ Eins tell arbeiten g ezog ene M asc hinen @ 0\ mod_1199717011038_78. doc @ 33980

Danger! - Unexpected movements of the machine

Effect: Danger to life or serious injuries.
•

Setting tasks must only be performed when the drive is switched off and the engine is at
a standstill!

•

Switching off the engine

•

Remove the ignition key.

•

Secure the machine against the possibility of rolling back.

Pos : 14.4 /Übersc hrift en/Übersc hrift en 2/ A-E/Ers tmont age @ 1\ mod_1202226261982_78. doc @ 58270

5.1

First installation

Pos : 14.5 /BA/ Ersti nbetriebnahme/Ers t mont age @ 1\ mod_1202224111998_78. doc @ 58190

The document "Assembly Instructions" describes how to install the device for the first time.

Pos : 14.6 /BA/-----Seit enumbruch------ @ 0\ mod_1196175311226_0. doc @ 4165

Содержание Swadro 807































































































Результаты поиска

Содержание Swadro 807

Отзывы:

Krone Swadro 807, Оригинальная инструкция по эксплуатации, Страница: 27 / 94

Результаты поиска

Содержание Swadro 807

Отзывы: