Krone Swadro 807 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 94

Krone Swadro 807 Скачать руководство пользователя страница 37

Driving and Transport

37

Pos : 18.1 /Übersc hrift en/Übersc hrift en 1/ F-J/F ahr en und Trans port @ 0\ mod_1196330049217_78.doc @ 6553

7

Driving and Transport

Pos : 18.2 /BA/ Sicher heit /Fahren und Transport /Mitf ahr en Str aß enfahrt/ Gefahr Straß enf ahrt , Mitf ahren gez ogene Swadros @ 2\ mod_1202456315526_78.doc @ 59426

Danger! - Road travel, carrying passengers, driving conduct

Effect: Danger to life, injuries or damage to the machine.

•

The machine must be fully and correctly hitched.

•

The side hoop guards of the machine must be attached.

•

The collapsible tine arms must be rotated.

•

The machine must be in transport position.

•

The tine guards must be installed on tines.

•

The control unit must be turned off.

•

Do not exceed the maximum permissible speed (see type plate).

•

Carrying passengers on the machine is not permitted.

•

When driving on public roads, the provisions of the Road Traffic Licensing Regulations
must be adhered to (lighting, identification).

•

Before starting, ensure that you have perfect visibility on and around the tractor as well
as the machine.

Pos : 18.3 /BA/ Sicher heit /Fahren und Transport /Mitf ahr en Str aß enfahrt/ Gefahr Straß enf ahrt , Mitf ahren Swadro zus at z SW 807/810/ 907 @ 2\ mod_1202920546961_78. doc @ 63113

Danger! - Road travel, passengers and handling

Effect: Danger to life, injuries or damage to the machine.

•

The width setting of the rotor arms must always be completely retracted (Swadro 810)

•

Check to make certain the locks have engaged correctly.

•

Before each transport trip, charge the outrigger arm hydraulic cylinders with pressure and
then set the tractor hydraulics to "Neutral" so the outrigger arm transport interlocks are
not under any load.

Pos : 18.4 /BA/-----Seit enumbruch------ @ 0\ mod_1196175311226_0. doc @ 4165

«
...
35
36
37
38
39
...
»

Содержание Swadro 807































































































Отзывы:

Нет отзывов