Krone Swadro 807 Скачать руководство пользователя страница 34

Страница: 34 / 94

Start-up

Pos : 16.24 /Ü berschrif ten/Ü berschrif ten 2/ A-E/ Anschl uss Beleuc ht ung @ 33\ mod_1254385308979_78. doc @ 319105

6.3

Lighting connection

Pos : 16.25 / BA/I nbetri ebnahme/ Schwader/ Ansc hluss Beleuc ht ung/ Ansc hluss Beleuc ht ung Swadr o 807 810 Swadr o 907 @ 2\ mod_1202391626522_78. doc @ 59135

SW9070004

Fig. 9

The lighting system is connected via the 7-pin connection cable (1).

To do this:

•

Insert the 7-pin connection cable plug (1) into the appropriate socket (2) of the tractor.

•

Insert the 7-pin connection cable plug (1) into the appropriate socket (3) of the machine.

•

Position the cable so that it will not come in contact with the wheels.

Pos : 16.26 / BA/I nbetri ebnahme/ Schwader/Hi nweis Sauber keit der St ec ker und St ec kdos en @ 2\ mod_1202399563131_78. doc @ 59273

Note

Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!

Pos : 16.27 / BA/-----Seit enumbruc h------ @ 0\ mod_1196175311226_0. doc @ 4165

Содержание Swadro 807































































































Результаты поиска

Содержание Swadro 807

Отзывы:

Krone Swadro 807, Оригинальная инструкция по эксплуатации, Страница: 34 / 94

Результаты поиска

Содержание Swadro 807

Отзывы: