Krone Swadro 38 T Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 66

Krone Swadro 38 T Скачать руководство пользователя страница 7

Introduction

7

Pos : 7 /BA/Ei nleitung/Ei nleitung @ 0\mod_1195562498677_78.doc @ 416

3

Introduction

These operating instructions contain fundamental instructions. These must be observed in
operation and maintenance. For this reason, these operating instructions must be read by
operating personnel before commissioning and use, and must be available for easy reference.

Follow both the general safety instructions contained in the section on safety and the specific
safety instructions contained in the other sections.

Pos : 8 /Ü berschriften/Ü bers chriften 2/U-Z/Ver wendungsz wec k @ 1\mod_1201707246738_78.doc @ 54055

3.1

Purpose of Use

Pos : 9 /BA/Ei nleitung/Sc hwader/Ver wendungsz wec k Sc hwader Hitc h @ 6\mod_1214977196872_78.doc @ 96971

The rotary rake is used to swath cut crops.

Pos : 10 /BA/Einl eitung/Gül tigkeit/Sc hwader/Swadr o 46T/42T /38T U S @ 8\mod_1219385558658_78.doc @ 117044

3.2

Validity

These operating instructions apply to rotary rakes of the series:
Swadro 38 T; Swadro 42 T; Swadro 46 T

Pos : 11 /Ü bersc hriften/Übersc hriften 2/K-O/Kennz eic hnung @ 0\mod_1195564622099_78.doc @ 496

3.3

Identification Plate

Pos : 12 /BA/Einl eitung/Kennzeic hnung/Schwader/Kennz eichnung Swadro 46T @ 9\mod_1220001357098_78.doc @ 124901

SW46T0001

Maschinenfabrik Bernard Krone GmbH

Heinrich-Krone-Str. 10 D-48480 Spelle

Made in

Germany

1

Figure 1:

The machine data are located on the type plate (1).

Pos : 13 /BA/-----Sei tenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165

«
...
5
6
7
8
9
...
»

Содержание Swadro 38 T



































































Отзывы:

Нет отзывов