Krone Swadro 2000 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 262

Krone Swadro 2000 Скачать руководство пользователя страница 106

Control Unit – Auxiliary Control

106

Pos : 20.14 / BA/I nf o-Cent er/Schwader/ Bedi eneinheit - Komfort /SW 2000/Z us atz bedi enung/Absenken Kr eisel Vorgewend- i n Arbeitsst ellung Bil d SW 2000 @ 36\ mod_1260879527881_78. doc @ 337034 @ 2 @ 1

7.5

Lowering the Rotors from the Headland Position to the Working Position

SW2000056

Fig. 68

Pos : 20.15 / BA/I nf o-Cent er/Schwader/ Bedi eneinheit - Komfort /SW 2000/Z us atz bedi enung/Absenken ei nz elner Kr eis el Vorgewende- in Arbeitss tell ung SW 2000 @ 23\ mod_1240399756801_78.doc @ 239868 @ 3 @ 1

7.5.1

Lowering Individual Rotors to Working Position

Use the keys

,

,

,

,

or

to inch the desired rotor downwards.

Pos : 20.16 / BA/I nf o-Cent er/Schwader/ Bedi eneinheit - Komfort /SW 2000/Z us atz bedi enung/Absenken der Kreis el paar weis e @ 61\ mod_1298962125176_78. doc @ 568636 @ 3 @ 1

7.5.2

Lowering the rotors in pairs

Pressing the key

first lowers the two front rotors, which are in the headland position, to the

working position, where they remain in the float position.

Pressing the key

again lowers the two middle rotors, which lower to the working position,

where they remain in the float position like the front rotors.

Pressing the key

again lowers the two rear rotors, which lower to the working position,

where they remain in the float position like the front and middle rotors.

Pos : 20.17 / BA/I nf o-Cent er/Schwader/ Bedi eneinheit - Komfort /SW 2000/Z us atz bedi enung/Absenken all er Kr eisel Vorgewendest ellung in Arbeitss tell ung SW 2000 @ 23\ mod_1240400086348_78. doc @ 239893 @ 3 @ 1

7.5.3

Lowering All Rotors to Working Position (Automatic Mode)

Note

The function will not be performed if a rotor is in transport position.

Pressing the

key automatically lowers all rotors to the working position where they remain

in float position.

The front rotors are lowered first, followed after time delay by the middle rotors.. After another
time delay, the rear rotors are lowered (see also the chapter "Adjusting the Automatic Time
<Lower Rotors>").

The function will not be performed if a rotor is in transport position.

LED on: Function is being performed, rotor in float position.
LED flashing: Raise/lower rotor mode active.

Pos : 20.18 / BA/-----Seit enumbruc h------ @ 0\ mod_1196175311226_0. doc @ 4165 @ @ 1

«
...
104
105
106
107
108
...
»

Содержание Swadro 2000







































































































































































































































































Отзывы:

Нет отзывов