EN
page 26
2. OPERATION
2.1 Control panel and relative symbols
2
3
1
B
C
A
D
E
F
G
H
I
J
K
L
pict. 2
A)
Cycle light indicator
B)
Selected cycle indicator
C)
Tank temperatur display
D)
Boiler temperature display
E)
ON / OFF indicator
F)
Regeneration indicator
G)
Drain indicator
H)
START push-button to start up cycle / select cycle
I)
Cool extra indicator
J)
Switching – On / STAND BY button
K)
Regeneration push-button (optional)
L)
Drain push-button (optional)
2.2 Machine start-up
2.2.1 Start-up
• Insert the over
fl
ow pipe in the special seat inside the tank. Make sure all the
fi
lters are
properly
fi
tted in their seats (see pict. 2). The
fi
lters must be cleaned every 30-40 wash
cycles and whenever necessary.
Do not operate the machine without fi lters and in particular the pump suction
fi lters.
• Close the door.
• Turn the water valve “open”.
Turn the main power switch ON.
Turn the button
"J"
(see pict. 1).
The machine start will be active when the
"E"
indicator will light green. After a few seconds
the tank
fi
lling phase starts.
pict. 1
• After
fi
lling, the machine automatically starts the heating phase.
• The machine will be ready for washing only when the boiler and tank thermometers
"C"
and
"D"
indicate that the required temperatures have been reached, which are 80-85°C
for boiler and 50-55°C for the tank.
• Insert the special green rinse aid dispenser tube in the liquid rinse aid container and
check that the quantity is suf
fi
cient for the daily requirement. The transparent tube (if
present) must be inserted in the detergent container.
