EN
page 31
4. H.A.C.C.P. AND HYGIENE REGULATIONS
• When starting the machine ON, no wash-cycle will be starting until the set boiler and
wash-tank temperatures are reached. During operation, the machine will not start the
rinse cycle till the set boiler temperature is reached.
• Remove carefully all solids from the objects to be washed, to avoid obstruction of
fi
lters,
nozzles and piping.
• Drain the wash tank and clean the
fi
lters at least twice a day.
• Check if the detergent and rinse-aid dosage are correct (as recommended by the
manufacturer). In the morning, before starting the machine, check that the quantity of
chemicals in the canisters is enough for daily supply.
• Keep your working tables clean.
• Extract the rack with clean hands or gloves to avoid
fi
nger marks.
• Do not dry or polish the washed objects with cloths, brushes or rags that are not
sterile.
5. MAINTENANCE
5.1 Routine
maintenance
WARNING: The machine is not protected against pressurized water jets. Do not use
pressure cleaning system against the machine.
It is recommended to contact the seller of chemicals for proper cleaning instructions,
in order to have detailed indications on methods and products for the correct periodical
machine sanitation.
Do not use bleach or chlorine based detergents.
Daily cleaning is needed to ensure that the machine runs perfectly. The following shall be
carried out:
• Turn the machine in
"STAND-BY"
mode, by pressing the push-button
"J"
of the control
panel (see chap.
2
).
• Remove the surface
fi
lters and clean them under running water (see pictures 4). Drain
the sump water (see par.
2.2.3
).
• Remove the pump
fi
lter and clean with a brush and a water shower.
• Remove the arms by loosening the
fi
xing screws, and thoroughly clean them, and the
nozzles under running water.
• Reassemble the parts and reposition the wash pipes
fi
rmly in place.
• Clean the tank very carefully, using a water shower.
• It is recommended to leave the machine door open at the end of the day.
• Shut the water valve.
• Turned off the machine by switching the main power switch OFF.
Automatic cycle of machine self-cleaning/rinsing: recommended at each
day end.
• The machine should be in
"STAND-BY"
mode (without
fi
lter, without
over
fl
ow pipe and machine door closed). Push
Start
button
"H"
; an
automatic cycle of 60 seconds will start, after this the machine will be
in
"STAND-BY"
mode.
• Shut the water valve.
• Turned off the machine by switching the main power switch OFF.
