6
OPERATION
88
OPTISWIRL 4200
www.krohne.com
02/2022 - 4003930810 - MA OPTISWIRL4200 R10 en
C6.2.1 Login
Enter four digit password to gain a specific access level (for details refer to
Security
and permissions on page 61).
C6.2.2 Change Password
Change the password associated to the access level currently active.
C6.2.3 Reset Passwords
Reset all passwords to their default setting (for details refer to
Security and
permissions on page 61).
C6.2.4 Unlock SIL
Enter four digit password to unlock SIL mode (if not unlocked by order) and confirm
with enter key. For details refer to "Safety Manual".
C6.3 Extras
C6.3.1 Meter Type
Display of meter type as activated in A10 or C6.3.2...C6.3.4 (read-only).
C6.3.2 Heat
Activate a different meter type in order to enable advanced measurement options
(Gross/net heat, density by pressure or FAD) using a unique authorisation code.
Contact manufacturer to obtain this code.
C6.3.3 Heat & Dens. by Pres.
C6.3.4 Heat & Dens. & FAD
C6.4 Errors
C6.4.1 Message View
NAMUR messages (F, S, M, C, I)
For further information refer to
Status messages and diagnostic information on page
C6.4.4 Error Mapping
For specific NE 107 events it is possible to redefine the status type.
C6.4.4.1 Totalizer
This function defines the NE 107 status type for the totalizer overflow.
Select: Information / Maintenance Request / Out of Specification / Function Check /
Failure / None
Table 6-34: Menu description C6.1 - C6.4
Function
Setting / Description
C6 Device
C6.5 Units
6.5.1 Volume Flow
C6.5.2 Cst. Volume Flow
In all even numbered menus C6.5.2 to .22 Cst. Units (Custom Units) there is a submenu
with the prompt for "Text", "Offset" and "Factor".
6.5.3 Norm. Vol. Flow
6.5.4 Cst. Norm. Vol. Flow
6.5.5 Mass Flow
6.5.6 Cst. Mass Flow
6.5.7 Power
6.5.8 Cst. Power
6.5.9 Volume
6.5.10 Cst. Volume
6.5.11 Norm. Volume
6.5.12 Cst. Norm. Volume
6.5.13 Mass
6.5.14 Cst. Mass
6.5.15 Energy
6.5.16 Cst. Energy
6.5.17 Pressure
6.5.18 Cst. Pressure
6.5.19 Temperature
6.5.20 Cst. Temperature
6.5.21 Density
6.5.22 Cst. Density
C6.6 Factory Default
C6.6.1 Reset to Fact. Def.?
Query: Reset to Fact. Def.?
Press "
" and confirm reset to factory default with "Yes" or refuse with "No".
C6.8 Proof Test
For details refer to the "Safety Manual".
Table 6-35: Menu description C6.5 - C6.8
Function
Setting / Description
C6 Device
