KROHNE OPTISOUND 3020 C Скачать руководство пользователя страница 31

Страница: 31 / 52

6 Set up with the display and adjustment module

OPTISOUND 3020 C • Two-wire 4 … 20 mA/HART

30507-EN-190318

To maintain the function of the device, the lighting is temporarily

switched off if the power supply is insufficient.

Backlight

In the default setting, the lightning is switched off.

The respective min. and max. measured values are saved in the sen-

sor. The values are displayed in the menu item "

Peak values

•

Min. and max. distance in m(d)

•

Min. and max. temperature

Peak value indicator

When non-contact level sensors are used, the measurement can be

influenced by the respective process conditions. In this menu item,

the measurement reliability of the level echo is displayed as a dB

value. Measurement reliability equals signal strength minus noise. The

higher the value, the more reliable the measurement. A well function-

ing measurement normally has a value > 10 dB.

The instrument status is displayed in this menu item. If no failure is

detected by the sensor, "

" will be displayed. If a failure is detected,

there will be a sensor-specific flashing fault signal, for example

E013

". The failure is also displayed in clear text, for example "

measured value available

Information:

The fault message as well as the clear text indication are also carried

out in the measured value display.

Measurement reliability

Sensor status

With ultrasonic sensors, the "

Echo curve

" represents the signal

strength of the echoes over the measuring range. The unit of signal

strength is "dB". The signal strength enables the jusgement of the

quality of the measurement.
The "

False echo curve

" displays the saved false echoes (see menu

Service

") of the empty vessel as signal strength in "dB" over the

measuring range.
Up to 3000 measured values are recorded (depending on the sensor)

when starting a "

Trend curve

". Then the values can be displayed on

a time axis. The oldest measured values are always deleted.

Diagnosis - Peak value

Diagnosis - Measurement

reliability

Diagnostics - Device

status

Diagnosis - Curve selec-

tion

Содержание OPTISOUND 3020 C





















































Результаты поиска

Содержание OPTISOUND 3020 C

Отзывы:

Похожие инструкции для OPTISOUND 3020 C

Бренды по названию

Популярные бренды

KROHNE OPTISOUND 3020 C, Руководство пользователя

Результаты поиска

Содержание OPTISOUND 3020 C

Отзывы:

Похожие инструкции для OPTISOUND 3020 C

Бренды по названию

Популярные бренды