.52+1(
BM 70 A Kurzanleitung Seite: 2
4. Entwurf 03/97
Table of contents:
1. Transport and storage
2. Installation
2.1 Field assembly
2.2 Mechanical installation
3. Electrical connection
4. Setting parameters
5. Maintenance, error handling
6. Technical data
7. Safety information
Product liability and warranty:
The BM 70 A level gauge is designed solely for measuring the level, distance,
volume and reflection of liquids, pastes, slurries, particulate materials and solids.
The BM 70 A level gauge does not form part of an overfill protection system as
defined in WHG.
Special codes and regulations apply to its use in hazardous areas.
Responsibility as to suitability and intended use of these level gauges rests solely
with the user.
Improper installation and operation of our level gauges may lead to loss of warranty.
In addition, the "General conditions of sale", forming the basis of the purchasing
contract, are applicable.
If you need to return the level gauge to the manufacturer or supplier, please refer to
the information given in Section 5.
Items included with supply
The scope of supply encompasses, in the version as ordered:
•
Signal converter bolted to waveguide window and antenna; optionally: antenna
extension, sunshade (with fastening material in each case)
•
Shielding material with tightening strap
•
Device documentation (installation and operating instructions) plus instruction
card, and also these condensed instructions
•
Report on factory settings for the signal converter
•
Certification and approval documents, unless reproduced in the device
documentation
•
Bar magnet for operator control
•
Wrench for covers
Installation material (stud bolts, flange gasket and cabling) not supplied, to be
provided by customer!
