Operation & Installation Manual V12-V6 2010-05-31.doc
31/05/2010
44/60
have the Crystal Reports software installed on your computer you will not be able to read the
document afterwards.
6.2.6.2. Create a file listing the parameters in CSV format:
Click “Tools” to open the Tools menu
Click “Reporting” to open the Reporting submenu
Click “Parameters” to open a window in which all parameters are listed.
Click “Reports and Exports”
Click “Export to CSV…”
A window will open that allows to make a selection of the attributes to be listed for each
parameter.
NOTE!
A file consisting of all the parameters is not advisable again for metrological purposes the
calibration parameters are sufficient. So
Deselect All
Choose only Calibration
Figure 6-21: Choose data to export (csv)
Click the button “Export”
In the output dialog box that appears:
Specify the location where you want to store the file
Type a unique file name for the document
Click the button “Save”
6.2.6.3. Saving a parameter file in .XML format
Saving and storing the parameter file as in .XML format is an important feature. In case of
the unexpected event of a problem, you may need the file in this format to reload the
parameters in the processor of the ultrasonic gas flow meter, for example after replacing the
electronic unit.
