Operation & Installation Manual V12-V6 2010-05-31.doc
31/05/2010
32/60
Operation of the ultrasonic gas flow meter.
5.6 Start up
The flow meter will be delivered with fully programmed electronics. Additional start up
procedures are not necessary. After powering up the flow meter the KRONE logo should be
visible on the display of the converter and in about 25 seconds the measurement data will
appear. The standard default page will show the values of Process Flow, Process Velocity
and Speed of Sound.
The data presented on the display can be modified according to customer’s preferences.
5.7 Display and Operating Elements
Figure 0-1: Display
Display elements:
1
Field with product name
2
X is shown when an optical button is activated
3
Indication of page or menu number
4
Data fields: 1, 2 or 3 lines each showing one measurement result
In programming mode: the bar on the right side visualizes the number of the selected
item the options list.
5
Analog indicator (bar) 0 – 100% of defined measuring range
8
Status:
↑↓
scroll down to help listing
Operating keys:
The 4 operating keys are optical sensors that will respond when approached by a reflecting
object. They perform best when approached perpendicular to the front. The keys can be
actuated while the cover is closed.
7
Operating keys (see table below for description)
6
Infrared sensor for IR cable (this is an option, not implemented)
