USER’S MANUAL
10
Chapter 3 SAFETY
Read this chapter carefully and completely since important information for the
safety of the operator or others in case of improper use of the lift is included.
In the following text there are clear explanations regarding certain situations of
risk or danger that may arise during the operation or maintenance of the lift,
the safety device installed and the correct use of such systems, residual risks and
operative procedures to use (general specific precautions to eliminate potential
hazards).
Lifts are designed and built to lift vehicles and hold them in the elevated
position in an enclosed workshop. All other uses of the lifts are unauthorized.
In particular, the lifts are not suitable for:
-Washing spray work;
-Creating raised platforms for personnel or lifting personnel;
-Use as a press for crushing purposes;
-Use as elevator;
-Use as a lift jack for lifting vehicle bodies or changing wheels.
The manufacturer is not liable for any injury to persons or damage to vehicles
and other property caused by the incorrect and unauthorized use of the lifts.
During lifting and descent, the operator must remain in the control station as the
diagrams illustrated.
As the diagrams illustrated, the presence of persons inside the danger zone indicated
is strictly prohibited. During operations, persons are admitted to the area beneath the
vehicle only when the vehicle is already in the elevated position, when the platforms
are stationary, and when the mechanical safety devices are firmly engaged (e.g.: the
safety gear is completely locked).
DO NOT USE THE LIFT WITHOUT PROTECTION DEVICES OR WITH THE
PROTECTION DEVICES INHIBITED.
FAILURE TO COMPLY WITH THESE REGULATIONS CAN CAUSE
SERIOUS INJURY TO PERSONS, AND IRREPARABLE DAMAGE TO THE LIFT
AND THE VEHICLE BEING LIFTED.
Picture 6
