Kröber aeroplus E, Инструкция по эксплуатации

Страница: 23 / 46

aeroplus E
Taking into service
23
7.4 Assembly
ATTENTION!
The FireSafe
TM
check-valve must always be used to prevent the flame from
spreading in the event of a hose fire!
Read this entire manual before installing the check valve. This check valve may
cause injury to the patient or user if used or installed without knowing how it will
operate and under which conditions.
1. The FireSafe
TM
check-valve is not to be used for other applications.
2. The FireSafe
TM
check-valve is not to be stored or installed in the immediate
vicinity of an open flame or a strong heat source which could exceed a
temperature of 40°C. The non-return valve must not be installed or stored in the
vicinity of an open flame or strong heat source which could exceed a
temperature of 40°C.
3. Do not install this FireSafe
TM
check-valve near an open flame or near a source
of excessive heat that is likely to exceed 40°C.
4. Oxygen itself is not flammable, whereby the speed and extent of a combustion
process are considerably increased in an enriched oxygen environment. Oil
and/or grease are readily combustible in the presence of oxygen. Do not use oil
or grease on this connector! Do not lubricate corrugated plug connections!
5. Never administer oxygen or undertake oxygen therapy while smoking or when
near an open flame.
1 Insert the mains connection
cable into a mains socket .
ATTENTION!
The aeroplus E is only designed for
operation on a 230 Volt, 50Hz mains
network.
2 Connect the 0.33m-oxygen safety
hose to the oxygen concentrator outlet
connector.