Kripsol KLS 20, Руководство пользователя

Страница: 22 / 62

21
SCREEN No. 1
The unit starts up immediately when it is turned on. If there is a lack of water flow the LED
comes on and the fault is shown on the display. Otherwise, the unit operates normally. Press button
no. 2 (+) if you want to increase chlorine production. Press button no. 1 (-) if you want to reduce
chlorine production. Each time these buttons are pressed the percentage production changes by
10%.
If the salt levels are incorrect (too much or too little) the corresponding LED will light up and
the relevant message will appear on the display. The fault LED will also be lit up together with any
of these illuminated warnings.
SCREEN No. 2
To move to the second screen press buttons 1 and 2 (-) and (+) simultaneously to display
the following screen.
The left of the screen shows the times at which the unit is scheduled to reverse polarity. The
options the unit offers are:

Every 2 / 6 / 8 / 12 hours
FUNCTIONING
INDICATOR
% CHLORINE
PRODUCTION
1
2
UNIT STATUS
LEDS