background image

3

Cut off saw 

KU760

SAFETY INSTRUCTIONS

WARNING! When using electric tools 

basic safety precautions should always 

be followed to reduce the risk of fire, electric 

shock and personal injury including the 

following.

Read all these instructions before attempting 

to operate this product and save these 

instructions.

This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision or 

instruction concerning use of the appliance by 

a person responsible for their safety.

Safe operation

1- Keep work area clear

-   Cluttered areas and benches invite 

injuries.

2 - Consider work area environment

-   Do not expose tools to rain.

-   Do not use tools in damp or wet locations.

-   Keep work area well lit.

-   Do not use tools in the presence of 

flammable liquids or gases.

3 - Guard against electric shock

-   Avoid body contact with earthed or 

grounded surfaces {e.g. pipes, radiators, 

ranges, refrigerators).

4 - Keep other persons away

-   Do not let persons, especially children, 

not involved in the work touch the tool or 

the

extension cord and keep them away from the 

work area

5 - Store idle tools

When not in use, tools should be stored 

in a dry locked-up place, out of reach of 

children.

6 - Do not force the tool

-   It will do the job better and safer at the 

rate for which it was intended.

7 - Use the right tool

-   Do not force small tools to do the job of a 

heavy duty tool.

-   Do not use tools for purposes not 

intended; for example do not use circular 

saws to cut tree limbs or logs.

8 - Dress properly

-   Do not wear loose clothing or jewellery, 

they can be caught in moving parts.

-   Non-skid footwear is recommended when 

working outdoors.

-   Wear protective hair covering to contain 

long hair.

9 - Use protective equipment

-   Use safety glasses.

-   Use face or dust mask if working 

operations create dust.

10 - Connect dust extraction equipment

-   If the tool is provided for the connection 

of dust extraction and collecting 

equipment, ensure these are connected 

and properly used.

11 - Do not abuse the cord

-   Never yank the cord to disconnect it from 

the socket Keep the cord away from heat, 

oil and sharp edges.

12 - Secure work

-   Where possible use damps or a vice to 

hold the work. It is safer than using your 

hand.

13 - Do not overreach

-   Keep proper footing and balance at all 

times.

14 - Maintain tools with care

-   Keep cutting tools sharp and clean for 

better and safer performance.

-   Follow instruction for lubricating and 

changing accessories.

-   Inspect tool cords periodically and if 

damaged have them repaired by an 

authorized service facility.

-   Inspect extension cords periodically and 

replace if damaged.

-   Keep handles dry, clean and free from oil 

and grease.

15 - Disconnect tools

-   When not in use, before servicing and 

when changing accessories such as 

blades, bits and cutters, disconnect tools 

from the power supply.

16 - Remove adjusting keys and wrenches

-   Form the habit of checking to see that 

keys and adjusting wrenches are removed 

from the tool before turning it on.

17- Avoid unintentional starting

Ensure switch is in "off” position when 

plugging in

18 - Use outdoor extension leads

-   When the tool is used outdoors, use only 

extension cords intended for outdoor use 

and so marked.

19 -Stay alert

-   Watch what you are doing, use common 

sense and do not operate the tool when 

you are tired.

20 - Check damaged parts

-   Before further use of tool, it should be 

carefully checked to determine that it will 

operate properly and perform its intended 

function.

-   Check for alignment of moving parts, 

binding of moving parts, breakage of 

parts, mounting and any other conditions 

that may affect its operation.

-   A guard or other part that is damaged 

should be properly repaired or replaced 

by an authorized service centre unless 

otherwise indicated in this instruction 

manual.

Содержание KU760













Отзывы: