37
(Input Trigger continued)
OFF
The Phantom II does not respond to 12 V input trigger commands.
NORMAL
The Phantom II responds to 12 V input trigger commands.
THEATER
The Phantom II responds to 12 V input trigger commands, and the theater mode
enabled input is selected automatically.
See
Theater Mode,
on page 41.
IR Out Control
This function enables you to access Phantom II IR commands and program a
learning remote control.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
IR OUT.
2.
Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control
.
The front panel display (3) shows the default mode:
B-1
MAIN
.
3.
Use the level control knob or the up and down keys to select the desired IR
command from the list.
4.
Press the enter button or key to send the command out via the preamplifier
front panel IR transmitter (2). The stand-by LED (7) on the preamplifier chassis
flashes, indicating that the command has been sent.
5.
Repeat Steps 2-4 for each of the commands you wish to transmit.
6.
Press the enter button or key to confirm the selection. The front panel display
reads:
IR OUT.
For a listing of IR codes, see the Phantom II developer’s reference entitled
RS-232 Port: Sending Commands and Interpreting Data.
(SECTION SEVEN: Customizing the Phantom II continued)
5 Menu Button or Key
Enter or exit the menu.
14 Volume Knob
or Level Keys
Navigate the menu hierarchy;
review functions and configu-
ration options.
6 Enter Button or Key
Select a configuration option;
confirm a selection.
BACK
Scroll backwards through the
menu hierarchy; exit a menu
option without confirming it.
