Krell Industries KAV 3250 Скачать руководство пользователя

Страница: 2 / 32

KAV–2250
Stereo Power Amplifier

KAV–3250
Three-channel Power Amplifier

Instructions for Use

v 01.2

Krell Industries, Inc.

45 Connair Road

Orange, CT 06477-3650 USA

TEL 203-799-9954

FAX 203-891-2028

E-MAIL [email protected]

WEBSITE http://www.krellonline.com

This product is manufactured in the United States of America. Krell

is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell

Industries, Inc., its subsidiaries, and authorized agents. Multi Amp Throughput™ and Krell Current Mode™ are trademarks of Krell Industries, Inc. All other
trademarks and tradenames are registered to their respective companies.

This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC).

WARNINGS

The amplifier must be placed on a firm, level surface where it is not exposed to dripping or splashing.

The ventilation grids on the top and bottom of the amplifier must be unobstructed at all times during operation.

Do not place flammable material above or beneath the amplifier.

Contact your authorized Krell dealer, distributor, or Krell before using any devices designed to alter or stabi-

lize the AC power for the KAV–2250 and the KAV–3250.

Before connecting the KAV–2250 and the KAV–3250, make sure the amplifier is turned off and any output

device (such as a preamplifier) is in mute or stand-by mode. Make sure all cable terminations are of the

highest quality and free from frayed ends, short circuits, or cold solder joints.

Use only one input to each amplifier channel at a time.

Make sure that only one switch on an input switch bank is in the up (on) position at one time.

THERE ARE NO USER SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.

Please contact your authorized Krell dealer, distributor, or Krell if you have any questions not addressed in

this reference manual.

P/N 305573

Содержание KAV 3250

































Результаты поиска

Содержание KAV 3250

Отзывы:

Похожие инструкции для KAV 3250

Бренды по названию

Популярные бренды

Krell Industries KAV 3250, Руководство пользователя для владельца

Результаты поиска

Содержание KAV 3250

Отзывы:

Похожие инструкции для KAV 3250

Бренды по названию

Популярные бренды