SETUP
(
4
) Plunge the saw until it stops and release
the switch interlock. The saw remains in
this position.
(
5
) Press and hold the arbor lock and rotate
the blade until the lock engages.
Continue to hold the arbor lock.
(
6
) Using the large hex wrench stored in the
forward grip, remove the arbor screw and
flange washer.
(
7
) Remove the blade, install a replacement,
and replace and tighten the flange
washer and arbor screw.
(
8
) Press and hold the switch interlock
and push down on the saw to release
the plunge lock.
(
9
) Release downward pressure and return
the saw to full-up position.
(
10
) Return the blade-mode selector to the
Cut mode.
ATTENTION
!
The arbor screw has left-hand threads. Turn it
clockwise to loosen.
ATTENTION
!
Install the blade with the teeth oriented for clockwise
rotation when viewed from the blade-side of the saw. Tooth orientation
must match the blade-rotation indicator arrow on the saw
4
9
5
4
8
6
6
7
Tighten
Loosen
10
5
Содержание ADAPTIVE CUTTING SYSTEM
Страница 79: ...NOTES REMARQUES NOTAS ...
