background image

2  Using this operating manual

2.1  Information about the operating manual

n

Knowledge of the fundamental safety instructions and safety regulations is a basic require-
ment for safe handling and defect-free operation of the product.

n

This operating manual contains the most important information about enabling safe operation
of the product.

n

This operating manual and, in particular, the safety instructions are to be observed by all per-
sons who work on or with the product.

n

Furthermore, the rules and regulations for accident prevention in force at the respective oper-
ating site are to be observed.

2.2  Symbols in this operating manual

Safety instructions

This operating manual uses symbols to identify safety instructions. The safety instructions are pre-
ceded by signal words that indicate the severity of the hazard.

 DANGER!

This combination of symbol and signal word indicates an immediate dangerous situation,
which will cause death or severe injuries if it is not averted.

 WARNING!

This combination of symbol and signal word indicates a potentially dangerous situation which
can cause death or severe injuries if it is not averted.

 CAUTION!

This combination of symbol and signal word indicates a potentially dangerous situation which
can cause slight injuries if it is not averted.

 NOTICE!

This combination of symbol and signal word indicates a potentially dangerous situation which
can cause property and environmental damage if it is not averted.

Hand-held Spray Gun HS 30

ENGLISH

200-0415 

 200-0416 

 200-0417 

 200-0418

 

GB–7

Содержание 200-0415






















































Отзывы: