9.
Mount the pull lever ( Fig. 19/2) and screw together with the lever axle ( Fig. 19/3) and the
lever screw ( Fig. 19/1).
10.
Attach the material needle (
Chapter 8.6 ‘Changing the material needle’ on page 33
).
Fig. 20: Seal nut/screw
11.
Tighten the seal nut ( Fig. 20/1) and seal screw ( Fig. 20/2). The valve shaft and material
needle must move easily.
Operating instructions
T-Dok-692-GB-Rev.0
[email protected], www.krautzberger.com
GB–38
