Krautzberger 200-0192, Руководство по эксплуатации

Страница: 33 / 53

7. Clean contact surfaces of the diaphragm cover.
8. Screw the new diaphragm ( Fig. 10/3) firmly into the control pin ( Fig. 10/4).
9. Attach the diaphragm cover ( Fig. 10/2).
10. Lightly grease all 6 screws ( Fig. 10/1) and screw tight ( Tightening torque: 26 Nm ).
11. Fit the pressure and suction connection ( Ä Chapter 7.5 ‘Replace valve parts’ on page 30 ).
12. Perform test run (
Ä
Chapter 6 ‘Operation’ on page 23 ).
Diaphragm pump MP-560
ENGLISH
Article No. 200-0192 GB–33