Designation MDH
Type 50l
Dokumentation
DOK-315-GB.doc
Order-No. 200-0157
Clean pressure container using a suitable detergent when necessary
Fill pressure container. Do not exceed the maximum filling level (see Technical data)!
Close cover, tighten star-grip screws/clamp fasteners
Open compressed air feed
5 Regular checks, maintenance
Check the proper functioning of the safety
valve every time before you begin operat-
ing the system! To test the valve function,
turn the knurled screw of the safety valve
to the left. If the valve does not blow off,
the pressure container must not be oper-
ated until a new safety component has
been fitted!
Check the air and material lines and their
connections for seal-tightness and firm
seat every time before you begin operating
the system.
Before opening the pressure container,
check the cover gasket for soiling, wear
and damage.
Before opening a pressure container for all maintenance., servicing and cleaning
work on the open container, the air feed must always be shut off and the container
rendered pressureless!
Stirring mechanisms must be switched off and secured against accidental switch-
on!
6 Cleaning, disposal
Clean the pressure container after use thoroughly using a suitable detergent. Ensure that the
sealing surfaces between container and container cover are clean.
Dispose of materials accumulating during cleaning (cloths etc.) through the appropriate chan-
nels. Comply with the regulations of the local waste disposal authorities.
Comply with the safety instructions of the detergent manufacturer. Detergents may
be harmful to your health and be easily flammable!
Ensure that the detergent is compatible with the container materials!
6
