Krautzberger 090-3566, Руководство по эксплуатации

Страница: 34 / 61

8.6 Changing the material nozzle and the air nozzle
Disassembly
1. Interrupt the operation (
Ä
Chapter 7.5 ‘Shutting down’ on page 24 ).
2. If necessary, secure fluid pressure pump or pressurised fluid container for the spray media
against restart.
3. Interrupt the external material supply.
Fig. 13: Removing the material nozzle and the air nozzle
4. Loosen cap nut ( Fig. 13/1).
5. Remove the air nozzle ( Fig. 13/2).
6. Activate and hold the pull lever ( Fig. 13/5).
7. Unscrew the fluid nozzle ( Fig. 13/3) with a fork wrench.
Always replace fluid nozzle ( Fig. 13/3) and fluid needle ( Fig. 13/4) at the same time.
Operating instructions
T-Dok-198-GB-Rev.3
mail@krautzberger.com, www.krautzberger.com GB–34