background image

Usage Methods

1. The major components of this product are plastic, when using the product always observe the integrity

of the water purifier to ensure safe use.

2. In order to prevent microbial contamination of membrane components during storage and transportation

the reverse osmosis membrane elements packages can contain a small amount of protective solution
while the coconut activated post carbon filter will emit activated carbon powder the first time it is used.
So,   for   the   first   hour   the   water   purifier   is   operated,   do   not   open   the   water   storage   tank.     it   is
recommended that the water produced is thrown out, otherwise the pure water taste may be unusual.

3. When you start operating the water purifier the pure water TDS value may be a little high, after running

for some time the TDS value for pure water will gradually decrease until it is stable.

4. When you are using the water purifier, the inlet water ball valve should be opened and the pure water

faucet needs to be turned on.  When you are not using water turn off the water faucet, the high pressure
switch will automatically cut off the water supply.

5. In these “usage methods”, “usage” refers to when the power supply is connected and/or the inlet water

ball valve is open so the water purifier is in a working condition.

Maintenance and Upkeep

1. Filter Replacement Time

  This  machine’s  filter   replacement   cycle for   the various  filters  is  derived  from  statistical  indicators  on

average tap water use estimates.  If there are big discrepancies between the user’s actual water quality
and utilisation rate and the average indicators, there will be more obvious differences between the filter’s
actual use time and the estimated cycle such as premature filter clogging, premature failure, etc.  If this
happens, filter replacement should be based on actual use, you should also promptly contact your local
after-sales service department.

 This machine’s estimated filter replacement cycle is based on average household water consumption and

is suitable only for residential use, do not install this machine in places that require large volumes of
water.  If the water volume requirements are large, this company has appropriate machines for business
purchase.

 

According to economic statistics on municipal tap water, a three person family on average uses 10L of

water a day, according to the water volume and inlet water quality conditions, overall filter volume is
approximately as follows (the following data is for reference only):

Progression

 Times 

First: 10-inch 5-micron PP filter

2-6 Months

Second: 10-inch carbon block CTO filter

3-6 Months

Third: 10-inch 1-micron PP filter

3-6 Months

Fourth: RO Membranes

2~~3 years

Fifth:  Coconut activated post carbon filter

1 Year

Note: It is recommended that filter element replacement is carried out by after-sales staff.   Water
quality has a great influence on the life of the filter, the RO membrane’s lifespan is affected by many
factors, the above table expresses lifespan under standard conditions, in actual usage, because the
water quality may be different, the lifespan may exceed the above estimate, it may also be lower
than the estimate, this data  is for reference only.    Under normal circumstances if  the following
situations are experienced, you should consider replacing the filter:

-17-

Содержание NEW LINE A





















Отзывы: