Filter service life
LCD display show the INLET water TDS
LCD display show the PURE water TDS
The “Strong washing” button is a manual flashing start. It could pushed manually if need to make a
membrane cleaning.
Control Function
Flush Function
1.
When power on, the LCD display will all light, the buzzer will beep one time. Machine will flush
membrane 90 seconds.
2.
Click flush key in purify state, machine will flush membrane 90 seconds.
3.
Exit from source state, machine will flush membrane 30 seconds.
4.
Purify 2 hours accumulatively, machine will flush membrane 30 seconds.
The pump and inlet solenoid and flush-solenoid are all on.
Source Function
7.
If the low pressure switch is open more than 60 seconds continuously, Machine will in source state.
8. If the low pressure switch is close, machine will flush membrane 30 seconds.
The pump and inlet solenoid and flush solenoid are all off. The buzzer will beep 10 times.
Full Function
1.
If the high-pressure switch is open and the machine purify water more than 10 minutes, the machine
will flush membrane 5 seconds. ( Pump and inlet solenoid and flush solenoid are all on) If the
machine purify water less than 10 minutes, flush solenoid will power on 10 seconds.
The pump and inlet solenoid and flush-solenoid are all off.
Purify Function
3.
If the high-pressure switch is close, the machine will in purify state;
The pump and inlet solenoid are on, flush-solenoid is off.
Repair Function
2. If the machine purify water more than 6 hours continuously, and there is no full of tank, the machine
will be in repair state.
The pump and inlet solenoid and flush solenoid are all off. The buzzer will beep.
Leakage Function
If the leakage sensor detect water-leakage more than 5 seconds, the machine will be in leakage
state.
-11-