Warning:
◆
When installing the RO membranes, you should pay attention to the direction of the membrane;
◆
When installing the RO membranes, you should first make sure that one end of the membrane
has an O-ring;
◆
When installing, be sure to put the end with the O-ring into the end of the membrane shell with the
pure water connection, when installing correctly you only need a little force to put the reverse
osmosis membrane into the membrane shell, if you encounter too much resistance, please do not
force the reverse osmosis membrane into the membrane shell, doing so may cause permanent
damage to the membrane shell or membrane components (the membrane manufacturer does not
assume responsibility for returned components due to damage during installation);
◆
Damage to the membrane shell and reverse osmosis membrane element caused as a result of
the above reasons is not covered under the water purifier warranty.
Diagram 9
⑥
Installation of pretreatment filter cartridge
Take the filter cartridge out from package, tear the packing film and put into the filter housing by sequence , from right to
left
：
first put 5 micron PP filters; The second put activated carbon filter,
（
rubber gasket side direction up
；
The third put1 micron pp filters
（
diagram 10
）
Diagram
10
3. Installation Notes
1 When installing the water pipes, cannot install a drain stopper, in addition, for the water pipe bottom
connector, the screw nut should have no wire teeth exposed.
-15-