9
2. Cut Opening
·
Using the drill, make a small starting hole of about 1/2” on the inside of the cutting line.
·
Drill a second time in the same hole with a larger bit to enlarge the hole so that the jigsaw can be
inserted properly.
·
Put masking tape on the outer side of the cutting line. This will protect the counter from scratches
and shattered fragments caused by the jigsaw.
·
Using the jigsaw, trim the inside of the cutting line.
·
Insert the sink and adjust the opening if necessary.
!
CAUTION - To avoid the risk of personal injury, wear safety glasses and cut resistant gloves with
non-slip grip when cutting
.