5. Install Sink
·
Clean and dry the surface around the opening of the sink.
·
Verify that the sink fits correctly in the opening. The edge of the sink must sit on the counter.
·
Turn the unit upside down to apply sealant. Apply silicone-based sealant (not included)
underneath the edge of the sink.
·
Ensure that the plastic flap holding the screw underneath the sink is partially opened, as shown.
·
Insert the sink into the opening.
·
Fix the sink to the counter by swiveling the mounting brackets, as shown.
·
Tighten the screws in the front of the sink, followed by the ones in the back and on the sides of
the sink.
·
Remove excess silicone-based sealant.
NOTE: Please refer to the below to determine your install by countertop thickness. If the plastic insert
(B) is needed, remove the film and stick it to the under side of the countertop to accommodate for a
thinner countertop.
12
A
A
A
B
B
1- 1.75" (25-45mm)
Countertop
Thickness
.6- 1" (25-45mm)
Countertop
Thickness
.4 - .8" (10-20mm)
Countertop
Thickness
Countertop
Countertop
B
B
A
A
B
