8
·
Locate the drop-in template in the box.
·
Cut carefully along the dotted lines. Keep the inside portion of the template. It contains important
information concerning care and maintenance for your new sink.
·
Place the template on the counter, in the location where you will be installing the sink. When
placing the template, note the location of cabinet doors and panels to ensure that they are
compatible with sink installation. Make sure that there is enough space for water supply installation.
Identify the location of the faucet and soap dispenser.
·
Fix the template to the counter using masking tape.
·
Trace the inside of the template with a pencil. Remove the template from the countertop.
OR
·
Turn the sink upside down and place it on top of the counter. Note the location of cabinet doors
and panels to ensure that they are compatible with sink installation. Make sure that there is enough
space for water supply installation. Identify the location of the faucet and soap dispenser.
·
Trace the outer edge of the sink with a pencil, then remove the sink.
·
Measure 7mm in from the initial sink measurement and trace another line on the inside of the
drawing. This second line will be the cutting line.
1. Trace Opening
Paper Template
