36
Manual
www.kraun.it
Page 3
• PPP User Name:
User name for PPPoE dialup. It is provided by your ISP.
• PPP Password:
The password provided by your ISP for PPPoE dialup.
• PPPoE Service Name:
It is provided by your ISP. Do not fill it in if you don’t have it; otherwise
PPPoE dialup may fail
• Authentication Method:
It is used by ISP to verify its clients during PPPoE dialup. Select
“Auto” if you are not sure about it.
• Clone MAC:
This feature clones the MAC address of the PC that is currently entering the
router’s management page to work as the WAN MAC address of the router. Configure it
when your ISP requires a fixed MAC for your Internet access.
• Dial on Demand:
Automatically connects or disconnects Internet according to the use of
the network. It is recommended when your ISP limits network use time. This feature can
help you to save the Internet fee.PPP IP extension: The IP addresses of all packets including
management packets that egress WAN port will be converted to the WAN port’s IP address
once this feature is enabled.
• Enable PPP Debug Mode:
This feature can be enabled only when supported by your ISP.
• Bridge PPPoE Frames Between WAN and Local Ports: PPPoE dialup frame initiated by LAN
port will directly egress WAN port without being modified if this feature is enabled.
• Multicast Proxy:
Router enables multicast proxy server if this feature is enabled.
