19
Manual
www.kraun.it
The Ethernet interface configured on this page is used as a WAN port. You can select only one LAN
interface to function as a WAN port. Once you finish, click the “Apply/Save” button.
4.2.2 WAN Service
1. WAN Configuration in DSL Mode
PPP over Ethernet (PPPoE)
Click “Advanced Setup”—“Connection mode”(Select DSL mode and click “Apply”)---“WAN Service”-
--“ATM Interface” (Keep default DSL link type
EOA
unchanged,
and
click the “Apply/Save” button. For details, refer to 4.2.1----1) ---“Connection Setting” to enter WAN
service setup interface (page1) and then click the “Add” button there to select a WAN service type
on page 2.
Page 1
Page 2
Select PPP over Ethernet (PPPoE), modify the service description if necessary and then click “Next”
on page 2 to enter the page below (page 3):
