WP-5VH2 - Operating the WP-5VH2 Remotely Using the Embedded Web Pages
19
19
9
Operating the WP-5VH2 Remotely Using the
Embedded Web Pages
The
WP-5VH2
can be operated remotely using the embedded Web pages. The
Web pages are accessed using a Web browser and an Ethernet connection.
Before attempting to connect:
Ensure that your browser is supported (see
Section 11
Ensure that JavaScript is enabled
9.1
Browsing the WP-5VH2 Web Pages
Note
: In the event that a Web page does not update correctly, clear your Web
browser’s cache by pressing CTRL+F5.
To browse the WP-5VH2 Web pages:
1. Open your Internet browser.
2. Type the IP number of the device (see
Section 11.1
) in the Address bar of
your browser.
Note
: If authentication is enabled, the following window appears (
) and
you must enter the valid username and password to access the Web pages. For
default authentication details, see
Section 11.2
Figure 6: Entering Logon Credentials
Following a successful logon, the screen shown in
Содержание WP-5VH2
