Kramer Electronics Ltd.
WP-20CT
– Mounting WP-20CT
6
Mounting WP-20CT
This section provides instructions for mounting
WP-20CT
. Before installing, verify that the
environment is within the recommended range:
•
Operation temperature
– 0
to 40
C (32 to 104
F).
•
Storage temperature
– -40
to +70
C (-40 to +158
F).
•
Humidity
– 10% to 90%, RHL non-condensing.
Before mounting, connect the HDBaseT cable and power
Warning:
•
Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
To mount WP-20CT:
Insert the device into the in-wall box (note that first you need to connect the HDBaseT cable
and power) and connect the parts as shown in the illustrations below:
EU/UK Version
US-D Version
DECORA® design frames are included in US-D models. DECORA® is a registered
trademark of Leviton Manufacturing Co., Inc.
