Kramer Electronics Ltd.
WP-20CT
– Maintaining Device
32
2. Set Heat temperature to Celsius or Fahrenheit.
3. View inputs signal status.
4. View HDBT Link status:
▪
Inactive
indication off
– the receiver is connected (linked) to the output.
▪
Inactive
indication on
– a receiver is not connected to the output.
5. On the window right-hand side, view the reset log (auto or manual).
Status diagnostics are viewed.
Viewing Advanced Diagnostics
To view status diagnostics:
1. Go to the Diagnostics > Status. The Diagnostics page appears.
2. Click
Advanced
tab. The Advanced tab appears.
Figure 23: Diagnostics
– Advanced Tab
3. Under Traffic Counters, view the Sent and Received CEC commands to and from the
display.
4. Perform the following actions if required:
▪
Click
to clear the sent / received CEC command counters.
▪
Click
CLEAR ALL
to clear both sent and received counters.
▪
Click
REFRESH ALL
to refresh counting status view.
5. On the window right-hand side, view the event log and click:
▪
REFRESH, to refresh the list.
▪
EXPORT, to export the log to text file.
Advanced diagnostics are viewed.
