Kramer WP-20CT, Руководство пользователя

Страница: 21 / 47

Kramer Electronics Ltd.
WP-20CT
– Operating and Controlling WP-20CT
19
2. Select one of the following auto-switching modes from the Video Selection Mode
dropdown:
▪
Manual
– Switching is only done manually. Auto-switching is disabled.
▪
Last Connected (default)
– When a new source is connected, automatically switch to
that input.
▪
Priority
– The system first looks to switch to the priority input (default = USB-C input).
Drag the input name to change the priority.
3. Click SET VIDEO .
Auto-switching mode is configured.
Defining Signal Timeout Settings
WP-20CT enables you to define a time delay before an automatic switching operation is
initiated by the system.
To define timeout settings:
1. Go to the AV Settings > Auto switching tab ( Figure 11 ).
2. Define timing for the following:
▪
New AV signal
– When a new AV source is connected to the inactive input, delay
switching to this new signal (from 0 to 90 sec, default = 0).
▪
AV cable unplugged
– When the active input is unplugged, delay switching to the
other input (from 0 to 90 sec, default = 0).
▪
AV signal lost
– When the active input signal is lost without being unplugged (for
example when player is on stop), delay switching to the other input (from 5 to 90 sec,
default = 10).
▪
No active AV signal
– In a case where the active input was switched manually, and
then this signal is lost, this setting delays switching back to the other input (from 5 to
90 sec, default = 10).
3. Click SET TIMEOUT .