Kramer VS-88UHD Скачать руководство пользователя

Страница: 4 / 78

Kramer Electronics Ltd.

VS-88UHD – Introduction

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the power cord that is supplied with the unit.

Warning:

Do not open the unit. High voltages can cause electrical shock! Servicing by

qualified personnel only.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce

the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected

and recycled. To comply with the WEEE Directive, Kramer Electronics has made

arrangements with the European Advanced Recycling Network (EARN) and will cover any

costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on
arrival at the EARN facility. For details of Kramer’s recycling arrangeme

nts in your particular

country go to our recycling pages at

www.kramerav.com/support/recycling

Overview

Congratulations on purchasing your Kramer

VS-88UHD

is a high-quality

8x8 UHD Matrix Switcher

for 4K@60Hz (4:2:0) HDMI signals and

embedded audio. It reclocks and equalizes the signals and can route any one of eight HDMI,

HDCP-compliant sources (selectable) to any or all outputs simultaneously.

VS-88UHD

offers a flexible audio scheme where any HDMI digital audio input can be routed to

any HDMI digital audio output in addition to ARC support to produce an equivalent 16x12

audio matrix.

The

VS-88UHD

provides exceptional quality, advanced and user-friendly operation, and

flexible control.

Exceptional Quality



Max. data rate – 8.91Gbps data rate (2.97Gbps per graphics channel).



Max. resolution – Up to 4K@60Hz UHD (4:2:0).



Step-in over HDMI technology.



HDMI, HDCP and DVI Compliance.



HDMI support – Deep color, 3D, ARC, up to 7.1 uncompressed audio channels.



Kramer reKlocking™ and

equalization technology – rebuilds the digital signal to travel

longer distances.

Advanced and User-friendly Operation



Automatic input selection – Based on priority selection or last connected input.



Embedded pattern generator (480p) – With selectable patterns.

Проконсультироваться

купить

данное

оборудование

вы

можете

компании

АНД

Системс

адрес

: 125480,

Москва

ул

Туристская

.33/1; site: https://andpro.ru

тел

: +7 (495) 545-4870 email: [email protected]

При

обращении

используйте

промокод

AND-PDF

получите

скидку

Содержание VS-88UHD















































































Результаты поиска

Содержание VS-88UHD

Отзывы:

Похожие инструкции для VS-88UHD

Бренды по названию

Популярные бренды

Kramer VS-88UHD, Руководство пользователя

Результаты поиска

Содержание VS-88UHD

Отзывы:

Похожие инструкции для VS-88UHD

Бренды по названию

Популярные бренды